It is likely that at some point, you have thought about dedicating yourself to carpentry, even if it was an amateur or a hobby. We present you with a series of basic carpentry tips for beginners, useful for those who want to start in this world.

Keep your tools well.

For correct conservation of the tools, they cannot be stored in any way. Tools that have a delicate edge, for example, should be kept in a suitable position so that the edge is not damaged by its poor position or contact with other tools.

Buy or build a good workbench.

You can’t do good carpentry without a good workbench. Acquire or build a large workbench, which allows you to carry out all kinds of works. Make sure it is in a secluded place, where it does not disturb or interfere with other rooms in the house.

Measurements are very important.

Always measure the materials you are going to use for a project, the workspace, the place where you will place the work … Take measurements of everything you can since a bad measurement can create a domino effect that can have disastrous effects on the final project.

How to sand a surface

When working with wood, sanding is a critical step in preparing the surface. If you do not have experience, experts recommend starting with coarse sandpaper and then finishing with finer sandpaper. It is also important to sand in the direction of the grain.

Safety first

Put safety and physical integrity on your priority list. Wear the appropriate clothing, gloves, and protective glasses to carry out the work. Wearing safety boots is also a recommended option in case a heavy object falls on your foot.

How to varnish wood

After sanding, varnishing the wood is another of the most important phases in carpentry. In this case, you have to pay attention to two very important aspects: the brush, which must be as large and flat as possible, and porosity. Check if the wood is more or less porous to choose the best varnish and know how many layers to apply.

How to avoid chipping of wood

One of the main problems that arise when cutting wood is chipping. That is, when cutting the wood, it splinters and does not produce a clean cut. There are several ways to avoid it.

How to Drive Nails Without Hurting Yourself

Surely when starting in the world of carpentry, one of your biggest concerns was how to drive a nail without suffering in the attempt. Several tricks will make this task easier for you. If the nail is large, you can use the prongs of a comb to hold it while you nail it. If it is smaller, you can nail it to a piece of cardboard or polystyrene so that it stands upright when nailing it without using your fingers.

Trust a professional

If you see that a project is getting out of hand or do not have enough skills to carry it out, do not hesitate to hire a professional carpenter. By leaving the project in good hands, you will avoid risks to your health and not damage the materials, which can sometimes have a high cost.